Best phono cartridge p mounts

Phono cartridges are generally used to improve sound quality by converting an electrical signal into an acoustic one. They’re also used to reduce the volume of an amplifier or speaker to make them louder.

The way they do this is by using a stylus or a needle to pick up the signal and send it directly to a coil of wire inside the cartridge. It works by transforming the electrical signal into a magnetic field, and then sending it to the coil.

The coil then sends the magnetic signal to the magnetic field of the cartridge, and converts it into an acoustic signal.

Comparison Table

Best phono cartridge p mounts Features In 2023

Bestseller No. 1
Audio-Technica AT85EP Turntable Cartridge with Elliptical Stylus P Mount, 0.3 x 0.7 mil elliptical cartridge
  • .3 mil x .7 mil elliptical cartridge
  • Fits P-mount turntables
  • Features precision engineering
Bestseller No. 3
LP GEAR CFT4PSE P-mount cartridge
  • Carbon fiber technology for remarkable nuance and tonal complexity
  • Harmonically exquisite, refractive, large multidimensional soundstage
  • Super Carbon Fiber cantilever for excellent tactile acuity to grooves
  • Spectra Elliptical diamond for very fine tracing accuracy; Diamond tip r/R radii: 8 × 18 µm (.0003 × .0007 inch)
  • Codeveloped and designed by Audio-Technica with LP GEAR
Bestseller No. 4
Original AT3472P better than AT3482P AT81CP cartridge
  • Made for P-mount T4P turntables
  • Industry Standard, original AT3472P cartridge used by many turntables manufacturers for Sound Quality, Performance, and Value
  • Aluminum alloy cantilever for accurate transmission of record groove modulations
  • Later models (AT3482P, AT81CP) tried to emulate AT3472P but failed due to cost constraints
  • Made in Japan by Audio-Technica
Bestseller No. 5
LP Gear T4P REFERENCE SERIES VML phono cartridge
  • Ultimate performance reference quality P-mount cartridge for recording and critical listening
  • Nude Microline diamond tip polished with perfection for superior fidelity and groove tracing accuracy
  • Made in Japan for superb cratsmanship and attention to detail
  • Each stylus undergoes QC and listening test as final inspection
  • LP GEAR VML cartridge, no other comes close
Bestseller No. 6
GRADO Prestige Blue3 Phono Cartridge w/Stylus - Standard Mount
  • Latest enhancements provide improved performance
  • Turntable cartridge - compatible with most turntables - standard mount
  • Outer housing dampening technique. 4 high purity copper wire coils
  • Twin magnet system. Patented Flux Bridge Technique
  • 4OurEars is the only Grado Authorized Amazon Reseller - Manufacturers Warranty applicable in US only
Bestseller No. 7
Audio-Technica AT-PMA1 Universal P-Mount to 1/2" Adapter , Black
  • P-mount to 1/2" adapter
  • Compatible with the AT85EP and AT81CP
  • To use T4P/P-mount cartridges as half-inch mount cartridges
  • Adapter screw and nut included
Bestseller No. 8
Cartridge and Stylus, Needle for Technics SL BD22, SL QD33, SL QD55, SL B350, SL D20, SL3, SL B100, SL B200, SL B21
  • Complete with fixing bolt and stylus guard and SPARE STYLUS
  • Up to date design fits vintage turntables
  • Excellent sound quality typical of Audio Technica
  • SL-D20, SL-3, SL-B100, SL-B200, SL-B21
SaleBestseller No. 9
Phanstiehl Diamond Needle Stylus for Audio-Technica ATN-3472P 3482P Panasonic EPS-91 Sanyo ST-M11 Sony ND-145G: 4213-D6
  • Used in cartridges: Audio Technica AT3472P, 3482P
  • Replaces: ATN 3472P, 3482P; Panasonic EPS-91; Sanyo ST-M11; Sony ND-145G & others
  • Tip:  Diamond
  • Speeds 16, 33 & 45 RPM
  • Manufactured in Switzerland
Bestseller No. 10
Audio-Technica AT-VM95C Dual Moving Magnet Turntable Cartridge Blue
  • VM95 Series dual Magnet cartridge with 0.6 mil Conical stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer Housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws - no nuts required

What is P-mount phono cartridge?

Cartridges with four terminals at the back just plug into the end of the tonearm.

Then the cartridge is secured to the tonearm with a single screw.

The half-inch tonearm is the simplest type and it’s perfect for smaller cartridges.

Does ortofon make AP Mount cartridge?

This OMP 10 moving magnet cartridge is designed for tonearms with T4P mounting sockets, the same as the original. The P-mount OMP 10 will fit any OMP 10 tonearm with a mounting socket compatible with this cartridge.

What is a T4P turntable?

T4P tonearms are designed to be interchangeable. A “T4P” insignia is usually found on the tonearm to indicate a P-mount cartridge.

This is not true for all brands, but any brand listed above will fit and work in a T4P tonearm.

The cartridge brand doesn’t have to match the turntable brand.

What is AP Mount headshell?

What is a p-mount cartridge? It is designed so that it can be attached directly to the arm and then screwed in place so that the cartridge doesn’t move during playback.

Are ceramic or magnetic cartridges better?

Magnetic cartridges are easier to turn than ceramic, so they require less force pressing down to navigate the grooves.

The sound is less powerful than with ceramic cartridges which means at some point in your system you will need to use a preamplifier.

Are all turntable Headshells universal?

The headshells are not universal. Some turntable manufacturers will use different tonearms and different mounting plates for their turntables.

Will any cartridge fit any turntable?

In short, the record cartridges do not fit the turntables.

In order to figure out which type of cartridge you have, you need to know what brand of printer your system uses. For this, look at the headshell and check the model number.

How do I know if my turntable is MM or MC?

Be careful to look for the presence of an ink cartridge in the stylus.

If the turntable has a replaceable stylus, you can replace the needle.

Finally, it’s most likely an MM cartridge. However, if it has a fixed stylus, it’s an MC cartridge.

Leave a Comment